西班牙琼脂糖

武汉科昊佳公司为西班牙琼脂糖代理商。琼脂糖备有大量现货，价格低，质量保证！欢迎联系！~

 
Biowest 相关资料如下 :
最权威的西班牙琼脂糖（Biowest Agarose）是一种电泳级别纯度很高的产品，作为著名的琼脂糖品牌，具有极佳的产品性价比，在同行中有着非常高的知名度，在同类产品中占据着最高的市场份额，西班牙琼脂糖（Biowest Agarose）不仅适用于蛋白电泳也可以用于其它核酸分析电泳。
技术参数： Agarose Low EEO
Gel Strength (1.0%) (g/cm² )………………≥750
Gelling Range (1.5%) (℃)………………36 - 39
Melting Range (℃)………………………87 - 89
EEO (-m_r )……………………………………≤0.15
Sulfate (%)………………………………≤0.15
DNase……………………………………None Detected
RNase……………………………………None Detected
Protease………………………………None Detected
 
Introduction:
Routine use agarose is ideal for everyday analysis of nucleic acids by gel electrophoresis or blotting (Northern or Southern) and is also suitable for protein applications such as Ouchterlony and radial immunodiffusion (RID).
Analysis Note  :
Sulfate content - used as an indicator of purity, since sulfate is the major ionic group present.
Gel strength - the force that must be applied to a gel to cause it to fracture.
Gel point - the temperature at which an aqueous agarose solution forms a gel as it cools. Agarose solutions exhibit hysteresis in the liquid-to-gel transition - that is, their gel point is not the same as their melting temperature.
Electroendosmosis (EEO) - a movement of liquid through the gel. Anionic groups in an agarose gel are affixed to the matrix and cannot move, but dissociable counter cations can migrate toward the cathode in the matrix, giving rise to EEO. Since electrophoretic movement of biopolymers is usually toward the anode, EEO can disrupt separations because of internal convection.
 
Preparation  of  Agarose  Gels  for  DNA  separations:
Weigh out the desired amount of agarose and place in an Erlenmeyer flask with a measured amount of electrophoresis buffer, e.g. for an 0.8% gel, add 0.8 gm of agarose and 100ml of TBE Buffer (1X), to a 200 ml flask. The larger flask insures against the agarose boiling over. Dissolve the agarose in a boiling water bath or in a revolving-plate microwave oven. All the grains of agarose should be dissolved and the solution clear. Cool the solution to 60°C (70°C for concentrations 2% or above) and pour immediately. Allow the gel to set for one-half hour before using. Make sure to use the same electrophoresis buffer in the gel as for the running buffer.